On Friday Danielle and I worked on the vacuum tube a bit. We replaced the regulator for a ball valve and noticed that the flow through the Aerolizer increased from the previously stated 45L/min to about 75L/min. While this is an improvement, we need to get it up to 90L/min.
Once we can get it to 90L/min, we will need to ensure that it maintains that level of airflow for at least 4 seconds. That may require us to add length to the tube which should be fine.
Finally, we need to get some more fittings for the tube. I’ll attempt to go to the hardware store to find some.